Stainless Steel Perimeters

Products

• Championship Perimeter Systems
• Compak Model Vacuum Sand Filters
• Deck Equipment
• Movable Bulkheads
• Multi-Use Perimeter Systems (M Series)
• Paddock Evacuator
• Paddock Regenerator
• Performance Perimeter Systems
• Pressure Sand Filters
• Recreation Perimeter Systems

Nylon Inlet Nozzles are sized for the flow requirements of each pool and fitted snugly into punched holes. Inlet nozzles are located inside a “V Groove” along the face of the gutter to prevent erosion of the pool finish below. Inlets are placed three feet apart but are grouped together (in threes) on the end walls of competition pools below the lane line anchors, so the stream of filtered water does not interfere with the swimmer’s approach to the wall.

Jet wash fittings are placed in the overflow channel to constantly flush the channel with clean water from the integral filtered water return tube.

Factory fabrication is a hallmark of Paddock perimeters. Complete fabricated sections made under controlled conditions in the factory with computer-driven equipment are shipped to the site in twelve foot sections for easy installation and quality assurance.

Paddock’s Protective Non-Slip PVC grating runs perpendicular to the pool wall for efficient transfer of surge through slots representing 32% open area. Available in custom colors upon request.

All horizontal stainless steel surfaces, including hand-hold areas, are sand blasted to create a slip-resistant finish.